ANSI-ISA-75.08-1999 installed face to face dimensions for flanged clamp or pinch valves
|
ID： |
8773760B45204414AF6B533E5C14D685 |
|
文件大小(MB)： |
0.16 |
|
页数： |
14 |
|
文件格式： |
|
|
日期： |
2009-5-22 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
Installed Face-to-Face,Dimensions for Flanged,Clamp or Pinch Valves,Approved 31 August 1999,ANSI/ISA–75.08–1999,Formerly ANSI/ISA–S75.08–1999,AMERICAN NATIONAL STANDARD,ISA The Instrumentation,Systems, and,Automation Society,–,TM,Copyright ?1999 by the Instrument Society of America. All rights reserved. Printed in the United,States of America. No part of this publication may be reproduced, stored in a retrieval system, or,transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or,otherwise), without the prior written permission of the publisher.,ISA,67 Alexander Drive,P.O. Box 12277,Research Triangle Park, North Carolina 27709,ANSI/ISA-75.08-1999,Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves,ISBN 0-87664-907-X,ANSI/ISA–S75.08–1999 3,Preface,This preface is included for informational purposes and is not part of ANSI/ISA-75.08-1999.,This standard has been prepared as part of the service of ISA toward a goal of uniformity in the,field of instrumentation. To be of real value, this document should not be static, but should be,subject to periodic review. Toward this end, the Society welcomes all comments and criticisms,and asks that they be addressed to the Secretary, Standards and Practices Board. ISA,67 Alexander Drive, P.O. Box 12277, Research Triangle Park, NC 27709,Telephone (919) 549-8411, e-mail: standards@isa.org.,The ISA Standards and Practices Department is aware of the growing need for attention to the,metric system of units in general, and the International System of Units (SI) in particular, in the,preparation of instrumentation standards. The Department is further aware of the benefits to,U.S.A. users of ISA standards of incorporating suitable references to the SI (and the metric,system) in their business and professional dealings with other countries. Toward this end, this,Department will endeavor to introduce SI-acceptable metric units in all new and revised,standards to the greatest extent possible. The Metric Practice Guide which has been published,by the Institute of Electrical and Electronics Engineers as ANSI/IEEE Std. 268-1982 and future,revisions will be the reference guide for definitions, symbols, abbreviations, and conversion,factors.,It is the policy of ISA to encourage and welcome the participation of all concerned individuals and,interests in the development of ISA standards. Participation in the ISA standards-making,process by an individual in no way constitutes endorsement by the employer of that individual, of,ISA, or of any of the standards that ISA develops.,The information contained in this preface, footnotes, and appendices is included for information,only and is not a part of the standard.,The following people served as members of ISA Subcommittee SP75.08, which prepared this,standard:,NAME COMPANY,H. R. Nickerson, Chairman Resistoflex Company,G. Borden Bechtel Power Corporation,C. Clarkson Clarkson Company,F. Dicosimo Robbin-Meyers,J. T. Emery Honeywell, Inc.,B. Howes Galigher-Ash Valve,R. B. Jones Dow Chemical Company,M. W. Kaye M. W. Kellogg Company,A. Levin Red Valve Company, Inc.,E. Lincoln Flow-Con Valve Corporation,O. P. Lovett, Jr. ISIS Corporation,R. A. Quance Walsh, Inc.,4 ANSI/ISA–S75.08–1999,H. Rich/R. Brodin Fisher Controls International, Inc.,H. Schwartz Flexible Valve Corporation,J. M. Simonsen Valtek, Inc.,R. U. Stanley Retired,W. C. Weidman Gilbert/Commonwealth, Inc.,The following people served as members of ISA Committee SP75 during the review of this,standard:,NAME COMPANY,L. R. Driskell, Chairman Consultant,J. B. Arant E. I. du Pont de Nemours and Company, Inc.,H. E. Backinger John F. Kraus & Company,G. Barb Muesco, Inc.,H. D. Baumann H. D. Baumann Associates, Ltd.,C. S. Beard*,N. Belaef Consultant,G. Borden Bechtel Power Corporation,R. Brodin/G. F. Stiles** Fisher Controls International, Inc.,E. H. C. Brown Dravo Engineers, Inc.,E. J. Cooney Air Products & Chemicals, Inc.,W. G. Dewart Rockwell International,J. T. Emery Honeywell, Inc.,H. J. Fuller Worcester Controls Corporation,L. Griffith Consultant,A. J. Hanssen Fluid Controls Institute, Inc.,F. P. Harthun Fisher Controls International, Inc.,H. P. Illing Kieley & Mueller, Inc.,R. B. Jones Dow Chemical Company,M. W. Kaye M. W. Kellogg Company,R. Louviere Creole Engineering,O. P. Lovett, Jr. ISIS Corporation,A. P. McCauley Chagrin Valley Controls, Inc.,T. V. Molloy Pacific Gas & Electric,H. R. Nickerson Resistoflex Company,J. Ozol Omaha Public Power Company,R. A. Quance Walsh Inc.,W. Rahmeyer Colorado State University,J. N. Reed Masoneilan/Dresser,G. Richards Jordan Valve Div., Richards Industries, Inc.,*Deceased,**On……
……